ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is first connected. If some portion of text appears blurred, use the AUTO ADJUST option to automatically synchronize to the incoming signal (see “Factory presets, auto-sync, and user settings” on page 38). If the image is still blurred, adjust pitch and phase by following the below procedure. For optimal display quality, set your video card to the maximum (native) resolution that can be used with Cintiq. See the “Product specifications” on page 68 for details.

1.In the Wacom Tablet control panel, select the CALIBRATE tab.

2.If you are working with multiple displays, be sure the option corresponding to Cintiq is selected in the MONITOR menu.

3.Click on the CALIBRATE... button to activate the calibration screen.

4.Using the OSD controls, open the OSD menu and select the PITCH option.

Then adjust the pitch level so the pattern of fine vertical stripes displays evenly.

(For details on changing the OSD settings, see “On Screen Display (OSD) settings” on page 38.)

5.In the OSD menu select the PHASE option. Adjust the phase level so that the adjustment pattern shows clearly.

6.After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

7.Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

Customizing

Page 37