REAR VIEW
On Screen Display (OSD) controls
Use these controls to adjust a variety of display settings. See “Adjusting the display” on page 38.
Digital/Analog (DVI/VGA) switch
Set this switch for the video connection you will be using.
Bearing hub
Fits into the bearing recess on the Cintiq stand. Allows rotation of Cintiq, and easy mounting and removal from the stand.
Touch Strip
Security slot
Integrated pen holder and alternate cable exit
The pen can be stored here. If you are not using the Cintiq stand supplied with the unit, you can route the cable to exit from this location. See “Using an alternate mount or stand” on page 62.
Touch Strip
Slide your finger over the Touch Strips to zoom,
scroll, or perform custom keystroke actions.
See “Pen display controls” on page 30.
Pen tether attachment point
One located on each side of unit.
Cabling and connectors
The connectors on the integrated cable are for
Important: Always store the interactive pen display on the Cintiq display stand or in its original packing carton when not in use. Do not store the display unit on a surface that would excessively bend or crimp the cable.
Next step: See “Installation” on page 17.
Your Cintiq interactive pen display
Page 15