UNPACKING AND MOUNTING THE CINTIQ PEN DISPLAY

Remove any packing materials from the back of the display unit and cabling. Mount Cintiq on the stand:

•Make sure the stand is placed in a stable position on your desktop or other work surface so that it will not tip or fall when Cintiq is mounted on it. Securely grasp Cintiq with both hands; the display should face toward you, with the power switch and LEDs located at the top.

•Align Cintiq parallel to the front of the stand so the bearing hub is located between the V-shaped upper edges of the stand’s bearing recess. The V-shaped edges will serve as a guide for positioning the bearing hub. See – A – below.

•With the back of Cintiq resting against the stand, lower Cintiq until the bearing hub rests securely in the bearing recess. See – B – on the following page. The display unit will be held in place by gravity; there will be no audible ‘snap’ to indicate a mechanical lock.

Bearing hub

Bearing recess

– A –

If you do not need to rotate the Cintiq pen display, you can secure it to the stand with the rotation lock screws. See “Optional display configurations” on page 61.

To learn about other mounting options, see “Using an alternate mount or stand” on page 62.

Unpacking your Cintiq

Page 11