ADJUSTING THE DISPLAY

FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS

Factory presets: For optimal display quality, set your video card to the maximum (native) resolution that can be used with Cintiq. See the “Product specifications” on page 68 for details.

Auto-sync: Cintiq automatically synchronizes to the incoming signal. The auto-sync function sets the horizontal and vertical screen position, as well as pitch and phase. Auto-sync will function between the supported horizontal and vertical frequency ranges. See the “Product specifications” on page 68 for details.

If Cintiq does not automatically synchronize with the incoming signal, you can use the OSD AUTO

ADJUST option to initiate display synchronization. Further screen display adjustments can be manually made using the On Screen Display (OSD) controls.

Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their default settings will invalidate the ICC color profile that was included on the Installation CD.

ON SCREEN DISPLAY (OSD) SETTINGS

The OSD function enables you to optimize a variety of display settings at the touch of a button. Make adjustments using the OSD controls located on the back of the unit. Reach over the top of the display to locate the buttons.

Digital/Analog

 

 

 

 

 

 

 

 

 

1. MENU button

 

 

 

 

 

 

 

 

(DVI/VGA) switch

 

 

 

 

 

 

Press to open or exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the OSD menu.

2. Selection buttons

 

 

 

 

 

 

 

ENTER button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use these buttons to select and highlight an option.

 

Activates the

Then press the ENTER button. The current settings and

 

selected OSD menu

adjustment sub-menu for that option will appear.

 

option.

Some settings may not be available when in DVI mode.

 

 

Use the buttons to select and adjust the option

 

 

settings. (Press the up button to increase a selected

 

 

item value. Press the down button to decrease it.)

 

 

After making changes, press the ENTER button to save.

 

 

See the following pages for a detailed description of

 

 

menu options.

 

 

Note: After changing a setting, the OSD menu will automatically close after a few moments of inactivity. You can also press the MENU button to close the OSD menu. All settings are automatically saved when the OSD menu closes and will be used the next time the unit receives a similar video signal. This is applicable to all display modes. If you make changes to the display appearance and cannot return to the original settings, use the RESET option to return the pen display to its original factory defaults.

Customizing

Page 38