DTU-710 Component Functions
Front View
MENU Button
Opens and closes the OSD*1 menu.
- (minus) Button, + (plus) Button
In the OSD*1 menu, Use these buttons to select an option that can then be activated. After activating a selected option, press the + button to increase a selected item value, and press the - button to decrease it.
| - | NE |
|
|
|
|
|
|
|
MENU | ENTER STATUS POWER |
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Integrated Tablet and LCD Screen
The LCD monitor*2 and tablet sensor function*3 as an integrated input and output device.
The LCD resolution is 1280 x 1024 pixels at 16,194,277 colors. The tablet sensor reports coordinates, pressure, switch, and eraser information.
ENTER Button
Press this button when you select or exit an item in the OSD*1 menu. ☞ P 22
POWER Switch
Turns the power to the unit on or off.
POWER Lamp
Lights blue when power has been supplied to both the
Glows orange when no video signal is received by the
STATUS Lamp
Lights blue when the pen is in the active area of the pen display tablet and the pen tip, side switch, or eraser are pressed. Note that the USB cable must be plugged into an active USB port before the LED will light.
*1 On Screen Display. ☞ P. 22
*2 As properties of LCD panel display, you may notice the followings. They do not mean the LCD is defective.
-When exerting hard downward pressure on the display, a moir pattern may temporarily appear.
-A very small number of pixels may appear in incorrect color.
-If an image area has fine striping (such as screen stripes), it may flicker or display a moir pattern or pooling image.
-When a still image is displayed for a long period of time, an afterimage may remain for a short period
of time.
*3 As the tablet portion of
16
