Wacom DTU-710 manual Using an Alternate Mount or Stand

DTU-710 Component Functions

Using an Alternate Mount or Stand

If you will be using DTU-710 in an installation that requires the use of an alternate mounting platform, you can remove the adjustable stand from DTU-710 and mount the pen display onto a VESA conforming mount arm or stand.

A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7

mmpitch (M4 Regular), and a maximum screw clearance depth of 15 mm. Exceeding the screw clearance depth of 15 mm will damage DTU-710 internal components.

To remove the adjustable stand and attach DTU-710 to a different mounting platform:

1.Turn off your computer and power off DTU-710. Then disconnect all cables from DTU-710.

2.Protect the display screen surface by spreading a soft cloth onto a flat table and placing DTU-710 face down on the cloth.

3.Remove the four screws and lift the adjustable stand assembly away from the body of DTU-710.

4.Using the appropriate screws for your mounting platform, firmly attach DTU-710 to the alternate mounting platform.

5.Rettach the cabling.

unscrew

CAUTION

When attaching DTU-710 onto an alternate mounting platform, be sure to follow all instructions in the documentation supplied by the platform manufacturer. If improperly installed, the unit could fall and be damaged.

18