Wacom DTU-710 manual Rear View, Stand Adjustment Lever, Connector Panel Cover

Rear View

Stand Adjustment Lever

Pull this lever to adjust the stand. Release the lever to lock the stand in place.

Connector Panel Cover

To remove, slide it to the right.

CAUTION

Be careful to avoid catching your finger in the gap of the movable portion of the stand.

Stand

The stand can be used to adjust the tilt angle of the unit from low (16°from horizontal) to high (72° from horizontal).

Important

Be sure to adjust the tilt angle of the stand to the low tilt position before packaging DTU-710. If you do not close the stand, the notched mechanism may be damaged during transportation and storage. Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the unit, always do so by grasping the main body casing.

17