If an input tool does not work as you expect, first open the Wacom Tablet control panel and check the assigned functions or reset the tool to its default condition.
To quickly return a tool to the default settings, remove it from the TOOL list by clicking on the control panel list’s [ – ] button. After the tool has been removed, place it back onto the tablet. The tool will be added back to the TOOL list with its default settings.
To test your input tools:
•In the Wacom Tablet control panel, click on the ABOUT button. In the dialog box that appears, click on the DIAGNOSE... button. The DIAGNOSTICS dialog box displays to show dynamic information about the tablet hardware and pointing devices, including the battery status of the currently selected tablet.
•If you have more than one tablet connected to your system, in the TABLET INFO column select the tablet for which you are testing your tool.
•Use the information presented in the DIAGNOSTICS dialog box when testing your tablet and tools.
Note: When testing your tool buttons, if a button is set to RADIAL MENU or OPEN/RUN..., that function will occur when the button is pressed. In this case you may want to change that button function before testing.
66