86
CHANGING THE TABLET MODE OPTIONS
Within the control panel’s TABLET list,
If desired, enter a new name to be used for the tablet icon.
STANDARD MODE is recommended for graphics applications, and is the default condition.
Choose RECOGNITION MODE for the maximum data rate. Required by some handwriting recognition software. Supported only on Bluetooth Specification v2.0 or later connections that support the EDR (Enhanced Data Rate) protocol.
INSTALLING MULTIPLE TABLETS
The TABLET list displays an icon for any supported tablet that has been detected on your system, and allows you to select the tablet for which your changes will apply.
Select a tablet icon for which to customize tool and application settings.
•The control panel will not launch unless a supported tablet is connected to the computer.
•Settings can only be viewed or changed for an attached tablet.
To add a new tablet, connect it to your computer. The system will automatically find the tablet and initialize it. An icon for the tablet will then appear in the control panel.
Important: When installing additional tablets on Windows systems, please note that the eraser function may not work in some applications when using the additional tablet(s). The eraser function will continue to work correctly using the first tablet that was added to the control panel.
To remove one of multiple tablets from the driver, in the Wacom Tablet control panel select the tablet to be removed and click on the [ – ] button next to the TABLET list.
•A tablet cannot be deleted from the control panel list unless it is attached to the computer.
•Note that you will need to restart your computer before you can again add the tablet to the driver.
86