![](/images/backgrounds/156822/156822-11674x1.png)
| 74 |
You notice a screen delay at | Open the Wacom Tablet control panel and go to the PEN tab. |
the beginning of pen or inking | Try decreasing the TIP DOUBLE CLICK DISTANCE (see adjusting tip feel |
strokes. | and |
| CLICK DISTANCE slider to the OFF position in order to turn off double- |
| click assist. |
| Try turning off the operating system inking features. |
|
|
You have to press hard with | Open the Wacom Tablet control panel and go to the PEN tab. Move the |
the pen when clicking, | TIP FEEL slider toward SOFT, or select DETAILS... and decrease the |
drawing, or writing. | SENSITIVITY and CLICK THRESHOLD settings. |
|
|
The pen tip does not function. | Be sure you are using the pen that originally came with Intuos4. |
| Other pens may not function properly on the tablet. |
| Check the control panel’s PEN tab and verify that a CLICK function is |
| assigned to the tip. |
| Try the pen eraser to see if that portion of the pen is functional. |
| A tablet status LED should brighten when the tip or eraser is pressed. |
| If not, you may have defective hardware. See testing your tools. |
|
|
Changing the function settings | Make sure you are changing the settings for the tool and application |
of an input tool has no effect. | that you are using. See working with multiple tools and application- |
|
The pen side switch does not work.
Be sure you are using the pen that originally came with Intuos4 or an Intuos4 accessory pen. Other pens may not function properly on the tablet.
Be sure to press the side switch when the pen tip is within 10 mm (0.39 inch) of the tablet’s active area. Do this without pressing down on the pen tip.
In the Wacom Tablet control panel, verify that the side switch is set to the function you are expecting to occur for the application and tool you are using.
Check also the SIDE SWITCH MODE. If CLICK & TAP is selected, you will need to first press the side switch while touching the pen tip to the tablet surface in order to perform a click function. See customizing tool buttons.
A tablet status LED should brighten when you press the side switch. If not, you may have defective hardware. See testing your tools.
74