Installing WatchGuard System Manager
Selecting where to install server software
During installation, you can select to install the management station and three WatchGuard System Man- ager Server components on the same computer. Or you can use the same installation procedure to install the server components on other computers. To decide, you must examine the capacity of your manage- ment station and select the installation method that best matches your needs.
If you install the Management Server, Log Server, or WebBlocker Server on a computer with an active desktop firewall other than Windows Firewall, you must open the ports necessary for the servers to con- nect through the firewall. Windows Firewall users do not have to change their desktop firewall configura- tion. See “Installing WatchGuard Servers on computers with desktop firewalls” on page 8 for more information.
Setting up the management station
The management station runs the System Manager software. This software shows the traffic through the firewall. System Manager also shows connection and tunnel status. The WatchGuard Log Server records information it receives from the Firebox. You can get access to this data using tools on the management station.
Select one computer on your network as the management station and install the management software:
1Insert the WatchGuard System Manager
2Click Connect to LiveSecurity on the WatchGuard System Manager Installation screen. This starts your Web browser and connects your computer to the WatchGuard Web site.
If you do not have an Internet connection, install the software from the
3Use the instructions on the screen to start your LiveSecurity Service subscription.
4Download the WatchGuard System Manager software. The speed of your Internet connection controls the time to download the software.
Make sure that you write down the name and the path of the file when you save it to your hard drive.
5When the download is complete, open the file and use the instructions on the screens to help you through the installation.
The Setup program includes a screen in which you select the components of the software or the upgrades to install. A different license is necessary when you install some software components.
Note
If your management station is already operating with a Windows toolbar, some users can find it necessary to stop and restart the toolbar before you can see the new toolbar components installed for the WatchGuard Management System.
6At the end of the installation wizard, a check box appears that you can select to start the Quick Setup Wizard. Make sure you install the cables to your Firebox before you start the Quick Setup Wizard.
Software encryption levels
The management station software is available in two encryption levels.
Base
Uses 40-bit encryption
Strong
Uses
A minimum of
User Guide | 5 |