Wayne-Dalton 9800 installation instructions Trolley Operator, optional INSTALLATION

	Trolley Operator
Tools Needed:	WARNING

OPERATOR MUST BE TESTED AT TIME

OF INSTALLATION AND MONTHLY

THEREAFTER TO ENSURE THAT DOOR

REVERSES ON CONTACT WITH 2 X 4

BOARD LAID FLAT UNDER THE DOOR.

FAILURE TO ADJUST OPERATOR,

IF NECESSARY, CAN RESULT IN SEVERE

OR FATAL INJURY. IF YOUR OPERATOR IS

EQUIPPED WITH A PHOTOELECTRIC EYE

SYSTEM, THEN THIS MUST BE TESTED AT

THE SAME TIME TO ENSURE THAT DOOR

DOES NOT CLOSE AND A CLOSING DOOR

OPENS IF PHOTOELECTRIC EYE SYSTEM

IS OBSTRUCTED. FAILURE TO MAKE

ADJUSTMENTS, IF NECESSARY, CAN

RESULT IN SEVERE OR FATAL INJURY.

1.Install operator rail 1/2” to 1” above high arc of top section of the door.

2.Mount operator to ceiling so that

1” to 1-1/2” clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket installed in Step 9.

4.Attach operator rail to suitable mounting surface 2 x 6 lumber minimum.

5.Attach operator to ceiling using perforated angle.

IMPORTANT: Angles must be securely attached to sound framing member(s).

SUITABLE	OPERATOR RAIL
MOUNTING
SURFACE 2 X 6
LUMBER MINIMUM

HEADER

door arm to operator bracket

perferated

OPERATORangle rail

operator

FRAMING MEMBERS

PERFERATED ANGLE

optional INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local35 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com