Wayne-Dalton 9800 Installing Fully Adjustable, Jamb Brackets, Installation

4	Installing Fully Adjustable
	Jamb Brackets
Tools Needed:	NOTE: If you have quick install jamb
None	brackets, skip this step and continue
	Step 5.
	The bottom jamb bracket is always the
	shortest bracket included with your
	door. If three jamb brackets are included
	with the door, the middle bracket on the
	track is the middle bracket in height.
	The top jamb bracket is the tallest
	bracket included.
	To attach the bottom jamb bracket,
	locate the lower hole/slot pattern of
	the vertical track. Align the slot in the
	jamb bracket with the lower hole of the
	hole/slot pattern in the vertical track.
	Loosely hand fasten the bracket onto
	the track with (1) 1/4”- 20 x 9/16” track
	bolt and (1) 1/4”- 20 flange hex nut.

Place the center jamb bracket over the hole/slot pattern that is centered between the bottom jamb bracket and flagangle. Align the slot in the jamb bracket with the lower hole of the hole/slot pattern. Loosely hand fasten the bracket onto the track with

(1)1/4”- 20 x 9/16” track bolt and

(1)1/4”- 20 flange hex nut.

Repeat if a third jamb bracket is provided, equally spacing the distance between the two center jamb brackets and the bottom jamb bracket and flagangle.

NOTE: While the bottom jamb bracket is the shortest in length that is included with your door, it does not necessarily mean it is the “short” (ST-0) jamb bracket.

fully adjustable jamb brackets

	ST-0	ST-1
jamb	hole/slot
	pattern
bracket		1/4”-20 x 5/8”
		track bolt

1/4”-20
flange	vertical
hex nut	track
jamb bracket

vertical

track

3rd Set

2nd Set

1st Set

INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local13 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com