Liquid Propane (LP) Cylinder(s)

The joint where the hose connects to the LP cylinder must be leak tested each time the LP cylinder is reconnected. For example, test each time the LP cylinder is refilled.

(1)

DOT 4BA240

00/01

(2)

Be sure the regulator is mounted with the small vent hole pointed downward so that it will not collect water. This vent should be free of dirt, grease, bugs etc.

The LP cylinder and connections supplied with your Vieluxe Gas Barbecue have been designed and tested to meet government, American Gas Association, and Underwriters Laboratories

requirements.

Liquid Propane Cylinder requirements

Replacement LP cylinders supplied by Vieluxe satisfy the above requirements. Check to be sure other cylinders have a D.O.T. certification(1), and date tested(2) is within five years. Your LP gas

supplier can do this for you.

If you have questions about spare LP cylinders contact Customer Service toll free at 1 (866)

VIELUXE.

All LP tank supply systems must include a collar to protect the cylinder valve.

The LP cylinder must be a 20-lb. size (18 1/4 inches high, 12 1/4 inches in diameter).

The LP cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (D.O.T.).

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

See” Check for Gas Leaks” on page 47.

14

Page 14
Image 14
Weber Gas Burner manual Liquid Propane LP Cylinders, Liquid Propane Cylinder requirements, See Check for Gas Leaks on