Cisco High-Density Analog Voice and Fax Network Module

Supported Standards, MIBs, and RFCs

Table 2 lists the hardware platforms that support this feature, and the releases in which the feature was first supported. If the First T train Release column is blank, the feature is not yet available in a Cisco IOS T release on that platform.

 

Table 2

Cisco IOS Release and Platform Support for this Feature

 

 

 

 

 

Platform

 

12.2(2)XT

12.2(8)T

 

 

 

 

 

 

Cisco 2600 series

 

X

 

X

 

 

 

 

 

 

Cisco 3640

 

X

 

X

 

 

 

 

 

 

Cisco 3660

 

X

 

X

 

 

 

 

 

 

Supported Standards, MIBs, and RFCs

Standards

No new or modified Standards are supported by this feature.

MIBs

No new or modified MIBs are supported by this feature.

To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules, go to the Cisco MIB website on Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

RFCs

No new or modified RFCs are supported by this feature.

Prerequisites

Obtain analog line or analog trunk service from your PBX, Key System, or PSTN.

Complete your company’s dial plan.

Establish a working telephony network based on your company’s dial plan.

Install at least one other network module or WAN interface card to provide the connection to the network LAN or WAN.

Establish a working IP and Frame Relay or ATM network. For more information about configuring IP, refer to the Cisco IOS IP Configuration Guide, Release 12.2.

Install appropriate voice processing and voice interface hardware on the router. See the “Configuring Analog FXO and FXS Voice Ports” section on page 11.

Cisco IOS Release 12.2(2)XT and 12.2(8)T

10

Page 10
Image 10
Weed Eater 2600 manual Supported Standards, MIBs, and RFCs, Prerequisites