Related Commands Description | Weed Eater 2600 specs

Cisco High-Density Analog Voice and Fax Network Module

debug dspapi

Related Commands	Command	Description
	debug hpi	Enables debugging for Host Port Interface (HPI) message events.

Cisco IOS Release 12.2(2)XT and 12.2(8)T

33

Image 33

Weed Eater 2600 manual Related Commands Description

Contents

Cisco High-Density Analog Voice and Fax Network Module Feature History Release Modification Base Module Feature OverviewVoice Port Numbers Interface FXS and FXO Interfaces Telephony Signaling Interfaces Disconnect Supervision Commands Delay in Voice Networks FXO Supervisory Disconnect Tone Commands Voice Level Adjustment Echo CancellationAdaptive Jitter Buffering Serviceability Voice Activity Detection CommandsBenefits Cost Effective Supported High-Complexity Codecs RestrictionsSupported Medium-Complexity Codecs Supported low-Complexity Codecs Supported Platforms Related DocumentsCisco 2600 series Prerequisites Supported Standards, MIBs, and RFCs Configuring Analog FXO and FXS Voice Ports Configuration TasksCommand Purpose FXO or FXS Default is Keyword default is 25 on Cisco 2600 seriesDefault is the pattern specified by the cptone Locale that has been configured Fine-Tuning Analog Voice Ports Configuring Voice Activity Detection VAD Configuring Disconnect Supervision Commands Reversal is enabled Enables battery reversal. The default is that batteryFor FXO ports-Use the no battery-reversal Command to configure a loop-start voice port to not Configuring FXO Supervisory Disconnect Tone Commands Sec. The default is From 0 to 1000 0 ms to 10 sec. The default isExits voice class configuration mode Voice network module is installed Configuring Timeouts Commands Timing Commands Configuring Adaptive Jitter Adjustment Voice Quality Tuning Commands Configuring Voice Level Adjustment Configuring Echo Adjustment Platform Command Syntax Verifying Analog Voice-Port Configurations Troubleshooting Chart, Voice Port Testing Commands, Troubleshooting Tips Problem Suggested Action Troubleshooting ChartReconfigure the voice port Keyword setting also called region tone is US Configuring Voice Level Adjustment section on Voice Port Testing Commands Loopback Function Tests Detector-Related Function Tests Relay-Related Function Tests Tone Injection Tests Keyword fax to force the voice port into fax mode Fax/Voice Mode TestsTest. Enter the keyword disable to return Voice port to voice mode Analog FXO Voice Port Example Configuration Examples Analog FXS Voice Port Example Debug dspapi, Debug hpi, Command Reference Debug dspapi Defaults Command Modes Command HistorySyntax Description Release Modification Related Commands Description Command Modes Command History DefaultsDebug hpi Usage Guidelines Examples To global configuration mode Global configurationVoice-port Cisco 2600, and Cisco 3600 Router Encapsulation Dial-peer voice Glossary