Dial-peer voice, Encapsulation | Weed Eater 2600 instruction

Cisco High-Density Analog Voice and Fax Network Module

voice-port

Related Commands	Command	Description
	dial-peer voice	Enters dial-peer configuration mode and specifies the method of voice
		encapsulation.

Cisco IOS Release 12.2(2)XT and 12.2(8)T

36

Image 36

Weed Eater 2600 manual Dial-peer voice, Encapsulation

Contents

Feature History Release Modification Cisco High-Density Analog Voice and Fax Network Module Feature Overview Base ModuleVoice Port Numbers Interface Telephony Signaling Interfaces FXS and FXO Interfaces Disconnect Supervision Commands FXO Supervisory Disconnect Tone Commands Delay in Voice Networks Voice Level Adjustment Echo CancellationAdaptive Jitter Buffering Voice Activity Detection Commands ServiceabilityBenefits Cost Effective Restrictions Supported High-Complexity CodecsSupported Medium-Complexity Codecs Supported low-Complexity Codecs Supported Platforms Related DocumentsCisco 2600 series Supported Standards, MIBs, and RFCs Prerequisites Configuration Tasks Configuring Analog FXO and FXS Voice PortsCommand Purpose FXO or FXS Keyword default is 25 on Cisco 2600 series Default isDefault is the pattern specified by the cptone Locale that has been configured Configuring Voice Activity Detection VAD Fine-Tuning Analog Voice Ports Configuring Disconnect Supervision Commands Enables battery reversal. The default is that battery Reversal is enabledFor FXO ports-Use the no battery-reversal Command to configure a loop-start voice port to not Configuring FXO Supervisory Disconnect Tone Commands From 0 to 1000 0 ms to 10 sec. The default is Sec. The default isExits voice class configuration mode Voice network module is installed Configuring Timeouts Commands Timing Commands Voice Quality Tuning Commands Configuring Adaptive Jitter Adjustment Configuring Echo Adjustment Configuring Voice Level Adjustment Verifying Analog Voice-Port Configurations Platform Command Syntax Troubleshooting Tips Troubleshooting Chart, Voice Port Testing Commands, Troubleshooting Chart Problem Suggested ActionReconfigure the voice port Keyword setting also called region tone is US Voice Port Testing Commands Configuring Voice Level Adjustment section on Detector-Related Function Tests Loopback Function Tests Tone Injection Tests Relay-Related Function Tests Fax/Voice Mode Tests Keyword fax to force the voice port into fax modeTest. Enter the keyword disable to return Voice port to voice mode Configuration Examples Analog FXO Voice Port Example Analog FXS Voice Port Example Command Reference Debug dspapi, Debug hpi, Defaults Command Modes Command History Debug dspapiSyntax Description Release Modification Related Commands Description Defaults Command Modes Command HistoryDebug hpi Usage Guidelines Examples Global configuration To global configuration modeVoice-port Cisco 2600, and Cisco 3600 Router Dial-peer voice Encapsulation Glossary