Manuals / Weed Eater / Lawn and Garden / Blower

Weed Eater 2600 Restrictions, Supported High-ComplexityCodecs, Supported Medium-ComplexityCodecs

Models: 2600

1 38

Download 38 pages 13.64 Kb

Page 8

Restrictions

Cisco High-Density Analog Voice and Fax Network Module

Feature Overview

Restrictions

The following features not supported at this time:

•ATM SVC

•SAS signaling

Supported High-Complexity Codecs

•G.711 a-law

•G.711 u-law

•G.723.1 ANNEX-A 5300 bps

•G.723.1 ANNEX-A 6300 bps

•G.723.1 5300 bps

•G.723.1 6300 bps

•G.726 16000 bps

•G.726 24000 bps

•G.726 32000 bps

•G.728 16000 bps

•G.729 ANNEX-B 8000 bps

•G.729 8000 bps

•GSMFR 13200 bps

Supported Medium-Complexity Codecs:

•G.726 16000 bps

•G.726 24000 bps

•G.726 32000 bps

•G.729 ANNEX-B 8000 bps (Annex A version)

•G.729 8000 bps (Annex A version)

Supported low-Complexity Codecs:

•G.711 a-law 64000 bps

•G.711 u-law 64000 bps

Note Three-way calling is not supported with low-complexity codecs.

The ring capacity is 10 Ringer Equivalency Number (REN). The total of all RENs of the telephones connected to the one line must not exceed the value 5, or some or all of the ringers may not operate.

Cisco IOS Release 12.2(2)XT and 12.2(8)T

8

Image 8

Weed Eater 2600 manual Restrictions, Supported High-ComplexityCodecs, Supported Medium-ComplexityCodecs

Contents

Feature History Feature Overview, pagePrerequisites, page Configuration Tasks, page Configuration Examples, pageFeature Overview Base ModuleVoice Port Numbers InterfaceTelephony Signaling Interfaces FXS and FXO InterfacesDisconnect Supervision Commands FXO Supervisory Disconnect Tone Commands Delay in Voice NetworksAdaptive Jitter Buffering Voice Level AdjustmentEcho Cancellation Voice Activity Detection Commands ServiceabilityBenefits Cost EffectiveRestrictions Supported High-ComplexityCodecsSupported Medium-ComplexityCodecs Supported low-ComplexityCodecsSupported Platforms Related DocumentsSupported Standards, MIBs, and RFCs PrerequisitesPlatform 12.22XTConfiguration Tasks Configuring Analog FXO and FXS Voice PortsFine-TuningAnalog Voice Ports optional Commandpattern01 through pattern12 name pre-set CommandPurpose Configuring Voice Activity Detection VAD Fine-TuningAnalog Voice PortsConfiguring Timeouts Commands optional Timing Commands optionalConfiguring Disconnect Supervision Commands Purpose Commandreversal is enabled Creates a voice class for defining one tone CommandPurpose Optional Specifies a tone cadence pattern to be CommandPurpose Purpose Configuring Timeouts CommandsCommand Purpose Timing CommandsCommand Voice Quality Tuning Commands Configuring Adaptive Jitter AdjustmentConfiguring Adaptive Jitter Adjustment optional Configuring Echo Adjustment optionalConfiguring Echo Adjustment Configuring Voice Level AdjustmentCommand CommandVerifying Analog Voice-PortConfigurations Command SyntaxCommand PurposeVoice Port Testing Commands, page Troubleshooting TipsTroubleshooting Chart, page Suggested Action Troubleshooting ChartProblem Voice Port Testing Commands Adjustment” section on page“Configuring Echo Adjustment” section on page section on pageDetector-RelatedFunction Tests Loopback Function TestsCommand CommandTone Injection Tests Relay-RelatedFunction TestsCommand CommandPurpose Fax/Voice Mode TestsCommand Configuration Examples Analog FXO Voice Port ExampleAnalog FXO Voice Port Example Analog FXS Voice Port ExampleAnalog FXS Voice Port Example Configuration Examplesvoice-port1/0/0 signal loopStart no vad voice-port1/0/1 signal loopStart no vadvoice-port,page Command Referencedebug dspapi, page debug hpi, page Defaults Command Modes Command History debug dspapiSyntax Description ExamplesRelated Commands DescriptionCommand debug dspapiDefaults Command Modes Command Historydebug hpi Usage Guidelines Examplesvoice-port Cisco 2600, and Cisco 3600 RouterUsage Guidelines DefaultsRelated Commands CommandDescription voice-portGlossary Glossary Cisco IOS Release 12.22XT and 12.28T