59.Attach the Curl Pad (36) to the Curl Post (35) with two 1/4” x 3/4” Bolts (90).
59
36
90
90
35
60.Make sure that all parts have been properly tightened before using the weight system. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on page 23 of this manual.
Before using the weight system, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. Refer to the CABLE DIAGRAMS on page 26 for correct cable routing. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See
22
