49.Wrap the Leg Press Cable (82) around a 3 1/2” Pulley (37). Attach the Pulley and a Cable Trap (44) to the Butterfly Upright (4) with a 3/8” x 5” Bolt (61) and a 3/8” Nylon Locknut (74). Do not tighten the Nylon Locknut yet. Be sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley.
50.Wrap the Leg Press Cable (82) around the 3 1/2” Pulley (37) removed in step 42. Attach the Pulley to the bottom of the Double
51.Wrap the Leg Press Cable (82) around a 3 1/2” Pulley (37). Attach the Pulley and a Cable Trap (44) to the 3/8” x 5” Bolt (61) in the Butterfly Upright (4) with a 3/8” Nylon Locknut (74). Be sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley.
52.Attach the end of the Leg Press Cable (82) to the Leg Lever (8) with a 5/16” x 2 1/2” Bolt (61), two 5/16” Washers (66), and a 5/16” Nylon Jamnut (105). Do not overtighten the Nylon Jamnut; the Cable must be able to pivot freely.
49 |
|
|
|
61 | 37 |
|
|
|
|
| |
82 | 44 |
|
|
| 4 | 74 |
|
50 |
|
|
|
79 | 74 |
|
|
42 |
|
| |
|
|
| |
| 37 |
|
|
| 82 |
|
|
51 | 4 |
|
|
|
| 82 | |
| 61 |
|
|
| 44 | 37 | 74 |
52 |
|
|
|
8 |
|
|
|
105 |
|
|
|
66 | 66 |
|
|
|
|
| |
| 82 |
|
|
| 63 |
|
|
19
