35.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25)
to the Butterfly Upright (1) with a 3/8” x 4” Bolt (59), a 3/8” Flat Washer (48), and a 3/8” Nylon Jamnut (63). Be sure that the Cable Trap is turned to
hold the Cable in place.
36.Wrap the Weight Cable (72) around a 3 1/2” Pulley
(24). Attach the 3 1/2” Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73)
with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut
(50) that was removed in step 23.Be sure that the
Cable Trap is turned to hold the Cable in place.
37.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x
1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63). | Be |
sure that the Cable Trap is turned to hold the |
|
Cable in place. |
|
38. Note: For convenience, the weights assembled in step 9 are not shown in the following draw- ings.
Wrap the Weight Cable (72) around a 3 1/2” Pulley |
|
(24). Attach the 3 1/2” Pulley and a Cable Trap (25) |
|
to the bracket on the Butterfly Base (4) with a 3/8” x |
|
1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63). | Be |
sure that the Cable Trap is turned to hold the |
|
Cable in place. |
|
15
35 |
|
1 |
|
| 59 |
| 24 |
| 25 |
| 72 |
48 |
|
63 |
|
36 | 73 |
54 |
|
| 23 |
25 | 50 |
| |
24 |
|
72 |
|
37 |
|
| 24 |
| 25 |
| 57 |
| 72 |
63 Bracket | |
| 4 |
38 |
|
72 |
|
| 57 |
| 24 |
25 |
|
63 |
|
Bracket | 4 |
