Weider WESY59101 To hold the Cable in place, Be sure, Place, Hold the Cable 75 in place

47. Remove the 3/8” Nylon Locknut (50) from the indi-			47
	cated 3/8” x 5 1/2” Bolt (55).
				76
	Wrap the Leg Press Cable (75) around a 3 1/2”
	Pulley (24). Secure the 3 1/2” Pulley and a Cable
	Trap (25) to the 3/8” x 5 1/2” Bolt (55) on the indi-
	cated side of the Press Base (6) with the 3/8” Nylon				24
	Locknut (50).	Be sure the Cable Trap is oriented
	to hold the Cable in place.
	Press a 2 1/2” Square Inner Cap (76) into the Press			55
	Base (6).		6	25
					50
				75
48. Remove the 3/8” Nylon Jamnut (63) from the indi-			48
	cated 3/8” x 4 3/4” Bolt (60).
	Wrap the Leg Press Cable (75) around a 3 1/2”
	Pulley (24) in the direction shown. Secure the 3 1/2”
	Pulley and a Cable Trap (25) to the 3/8” x 4 3/4”
	Bolt (60) on the indicated side of the Press Leg		Be sure
	Lever (90) with the 3/8” Nylon Jamnut (63).
	the Cable Trap is oriented to hold the Cable in		60
	place.		90		75
				25	63
				24
49. Remove the indicated 3/8” Nylon Locknuts (50).			49
				7
	Wrap the Leg Press Cable (75) around a 3 1/2”
	Pulley (24). Attach the 3 1/2” Pulley and a Cable
	Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi-			60
	cated side of the Press Seat Frame (7) with the first				25
	3/8” Nylon Locknut (50).				24
	Wrap the Leg Press Cable (75) around a 3 1/2”
	Pulley (24). Attach the 3 1/2” Pulley and a Cable			25
	Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi-				50
	cated side of the Press Frame (8) with a 3/8” Nylon
	Locknut (50).			24	75
	Be sure the Cable Traps (25) are oriented to			8
	hold the Cable (75) in place.
50.	Remove the indicated 3/8” Nylon Locknut (50).		50
	Attach the Leg Press Cable (75) to the 3/8” x 3 1/4”			2
	Bolt (62) on the indicated side of the Press Upright				62
	(2) with the 3/8” Nylon Locknut (50).
					50
					75

18