INSTALLATION (continued)

SERVICE TECHNICIAN INSTALLATION NOTES

An Ansul® technician must charge and arm the fire suppression system before the ventilator blower will operate. See page 10.

Installation and start up must be performed by an Authorized Installation Company.

Installer must complete the WARRANTY REGISTRATION form, and record appliance installation particulars on the CUSTOMER SERVICE DATA form in this manual.

Certain codes require cooking equipment to be restrained with a RESTRAINT DEVICE. It is the RESPONSIBILITY OF THE INSTALLER to check with the AUTHORITY HAVING JURISDICTION, in order to ascertain the applicability of this requirement to THIS SPECIFIC EQUIPMENT INSTALLATION. Any restraint device must allow access to the back and sides of the unit to provide for servicing and maintenance, and must not interfere with the operation of the FIRE SUPPRESSION SYSTEM.

IMPORTANT!

Verify that this VENTILATOR and food cooking equipment installation is in compliance with the specifications listed in this manual, with local code requirements, and in accordance with N.F.P.A 96

(THE STANDARD FOR VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS - current edition).

THIS IS THE

RESPONSIBILITY

OF THE INSTALLER

ELECTRICAL INSTALLATION

1.This appliance must be installed by a licensed electrician in accordance with all applicable codes and ordinances.

Electrical connection terminal block and ground lug are accessible by removing the right side panel.

2.Refer to the nameplate on the right side of the appliance. Verify the ELECTRICAL SERVICE POWER. Voltage and phase must match the nameplate specifications, and available electrical service amperage must meet or exceed the specifications listed on page 1 Wiring must be no less than 4 AWG solid copper wire, rated for at least 90ºC.

NOTE: Wire gauge, insulation type and temperature rating , as well as type, size and construction of conduit, must meet or exceed applicable specifications of local codes and of the National Electrical Code.

3.This appliance must be connected to a suitable building ground. The equipment ground connection is marked " ".

4.The appliance is shipped from the factory wired for 3-phase electrical service. Refer to the Wiring Diagram included with this appliance, and verify that field wiring conforms to this diagram.

IMPORTANT: This appliance is not approved for 1Ø operation. Conversion of this appliance to single-phase operation will void the warranty.

DANGER

ELECTRIC

SHOCK

HAZARD

ELECTRIC CONNECTIONS MUST BE MADE BY A LICENSED ELECTRICIAN Electrical shock will cause death or serious injury.

CAUTION:

Electrical Shock

Hazard

The ground lug of this appliance must be connected to a suitable building ground. NOTE: This appliance requires a dedicated 60 Amp electrical branch circuit protection.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the appliance.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

9

Page 10 Page 12
Page 11
Image 11
Wells WVOC-4HF, WVOC-4HS Service Technician Installation Notes, Electrical Installation, This is Responsibility Installer
Page 10 Page 12

WVOC-4HF, WVOC-4HC, WVOC-4HS specifications

The Wells WVOC-4HS is a cutting-edge vaporizer designed to meet the needs of various industrial applications, particularly in the pharmaceutical and chemical sectors. Known for its exceptional performance and reliability, the WVOC-4HS stands out with its innovative features and advanced technologies.

One of the main features of the Wells WVOC-4HS is its high-efficiency heating system. Utilizing advanced thermal conduction methods, this vaporizer ensures rapid and uniform heating of the material, minimizing any potential degradation while maximizing output. Its robust design supports a variety of materials, providing versatility in application.

The WVOC-4HS is equipped with a user-friendly digital control interface that allows for precise temperature regulation and monitoring. This feature is crucial in industries where specific temperature thresholds must be maintained for optimal safety and efficacy. The control system can be integrated with existing automated systems, enabling seamless operation and consistent performance.

Another important characteristic of the Wells WVOC-4HS is its safety protocols. The design incorporates multiple safety features, including over-temperature protection and pressure relief valves. These systems are designed to prevent accidents and ensure a safe operating environment for all personnel.

The vaporizer’s construction is also noteworthy, as it is made from high-grade, corrosion-resistant materials. This not only increases the longevity of the device but also ensures that it can withstand various chemicals, making it a dependable choice for rigorous industrial use. This durable build quality is essential for maintaining performance in demanding environments.

Additionally, the Wells WVOC-4HS boasts a compact design that allows for easy installation and integration into existing setups. Its lightweight architecture aids in reducing space requirements without compromising on performance.

In summary, the Wells WVOC-4HS is a reliable and efficient vaporizer that combines high-efficiency heating, advanced digital controls, robust safety features, and durable construction. Its versatility makes it an ideal choice for industries that require precise vaporization processes, ensuring optimal performance in every application. Whether used in pharmaceutical production or chemical processing, the WVOC-4HS exemplifies technological advancement and reliability in vaporization.
Top Page Image Contents