when sensor is activated.
CHANNEL - Press 
button to select the channel to record when sensor is activated.
DURATION - Press 
button to select the duration of alarm output and the recording time of the linked channel.
Available alarm output and channel recording duration – 5, 10, 15, 30, 60, 120, and 180
seconds
4-3-3-4. MOTION DETECTION Setup
In MUX setup screen, select MOTION to go to MOTION setup screen.
CHANNEL NUMBER - Press 
buttons to select the channel to set the motion detection.
REGION – Press 
buttons to select the process of the motion detection area setup.
<FULL>: The motion detection is always applied to full screen region.
<INDIVIDUAL>: The user can set 4 motion detection areas per channel. Please refer to
ALARM NUMBER - Press 
buttons to select the port on which an alarm out is made when motion is detected.
SENSITIVITY – Move the cursor on the field of SENSIVITY “L 1 2 3 4 5 6 7 8 9 H”
and select sensitivity using 
buttons. The selected sensitivity will be highlighted in Yellow color.
SENSITIVITY “1” - Only reacts to big movements (low sensitivity).
SENSITIVITY “5” - Reacts to average movements (medium sensitivity).
SENSITIVITY “9” - Reacts even to small movements (high sensitivity).
POST RECORD – Using 
buttons, select the duration of
27
