4-4-8. DYALIGHT SAVING
1.Press 
buttons to decide whether to apply DAYLIGHT SAVING or not by selecting <ON> or <OFF>.
2.After selecting <ON>, move the cursor to BEGIN (MM/DD/HH) field and press SEL button. This will highlight the front part of the displayed date in yellow.
3.Use 
buttons to set the date in MM/DD/HH format.
4.Press SEL button to apply the changed time.
5.When CURRENT DATE and CURRENT TIME is located between BEGIN and END, DLS (DAYLIGHT SAVING) is applied and operated.
NOTICE
-The Northern Hemisphere: The date and time in BEGIN is earlier than END.
-The Southern Hemisphere: The date and time in END is earlier than BEGIN. EXCEPTION
-DLS can’t start from 23:00.
-DLS can’t be applied, if the date of BEGIN and END is same.
34
