6. HDD Installation

6-1. Installing HDD in removable HDD rack

For DVR, the hard disk, on which images are saved, is installed into the RACK.
The hard disk is installed into DVR as shown in the following instructions.
1. Prepare a hard disk and rack as shown below.
2. Set the hard disk to master. (Refer to the JUMPER SETTING of the hard disk being
installed)
3. Open the upper cover of the rack and connect the power cable and data cable of the
hard disk and the rack.
4. Put the cover back on as shown.
5. Tighten the clamping screws on both sides of the rack.
64