Western Digital WDBLGT0120KBK, WDBLGT0160KBK, WDBLGT0040KBK, WDBLGT0080KBK Create an iSCSI Target

APPENDIX

Setting

Description

Alias	The user-friendly name used as an additional descriptive
	name for the target.
Status	The status of your target.
	•	xx initiators connected.
	•	Disabled
Security	The assigned security for the target.
	• None: No security has been assigned to this target
	• CHAP: Challenge Handshake Authentication
		Protocol (CHAP) security has been assigned to the
		target.
Size	The size of the target (e.g., 4, GB, 1 TB)
Server Capacity	Displays the total amount of space on your server and how it
	is distributed (i.e., available server space; used server space).

Create an iSCSI Target

To create an iSCSI Target that can be used in the WD Sentinel DX4000 server:

1.Click Create an iSCSI Target in the ISCSI Tasks pane. The New iSCSI Target window appears.

2.In the Alias field, enter an alias for your target. The alias should be a descriptive name for your target.

3.In the Size field, enter the size of your target, then select the unit of information (e.g. KB, MB, GB, TB) from the pull-down menu.

Note: Available space displays to the right of this field.

WD SENTINEL DX4000	68
ADMINISTRATOR’S MANUAL