Master Unit Back Panel | Western Telematic IPS-15 specs

IPSInternetPowerSwitch;User'sGuide

Plug Indicator and Manual Control Button: An On/Off Indicator and Manual Control Button for the Master Unit's switched plug. To manually switch the plug "On" or "Off", press and hold the control button for one second.

Note: If desired, the Manual Control Button can also be disabled, set to control only the plug on the Master Unit, or set to control the Master Unit plus all connected Satellite Units as described in Section 5.3.1.

2.1.2.Master Unit Back Panel

The Back Panel of the IPS-15 Master Unit includes a master power switch, the switched AC outlet, a power inlet, and a circuit breaker as described below.

Figure 2.2: IPS-15 Master Unit - Back Panel

2-2

Master Power Switch: This switch must be "On" in order for the IPS-15 to function. Note that this switch is not used to set the On/Off status of the switched outlets.

Switched AC Outlet: A 115 VAC outlet, that can switch up to 15 Amps. If more than one switched outlet is required, optional IPS-15 Satellite Units can be easily added to provide control of up to 17 outlets.

Power Inlet: A 115 VAC inlet that supplies power for the IPS's command functions and the switched plug.

Circuit Breaker: 115 VAC, 15 Amps.

Image 8

Western Telematic manual IPS-15 Master Unit Back Panel

Contents

WTIPartNo.13301Rev.B Page Table of Contents IPSInternetPowerSwitchUsersGuide List of Figures Intelligent Power Control Introduction Easy to Configure, Easy to Use Typographic Conventions Master Unit Front Panel Unit DescriptionMaster Main Unit Master Unit Back Panel IPS-15 Master Unit Back Panel Optional Satellite Unit Satellite Unit Front Panel Satellite Unit Back Panel IPS-15 Satellite Unit Back Panel Hardware Installation Quick Start Connections Diagram QuickStart For Optional Satellite Units Only Communicating with the IPS-15 Web Browser Interface QuickStart Text Interface $ telnet 192.168.168.168 Enter IPSInternetPowerSwitchUsersGuide Connection to Switched Outlets InstallationPower Supply Connection Connecting the Network Cable Connecting a Local PCConnecting an External Modem Console Port Connection Installation Connecting Optional IPS Satellite Units IPSInternetPowerSwitchUsersGuide Configuration System Mode and User Mode Accessing the Web Browser Interface Communicating with the IPS Configuration Accessing the Text Interface Plug Status Screen Text Interface Configuration Menus General Parameters Menus General Parameters Menu Web Browser Interface 9InactivityTimeout5. ConfirmationMin IPSInternetPowerSwitchUsersGuide Plug Parameters Menus Plug Parameters Menu Text Interface Network Parameters Menus Network Parameters Menu Text Interface IP Security Feature Permit Telnet Parameters Menus Web Server Parameters Menus 11 Telnet Parameters Menu Text Interface 13 Web Browser Parameters Menu Text Interface Save Configuration Parameters Operation Plug Numbers and Plug Zones Operation via the Web Browser Interface Plug Status Screen Web Browser Interface Operation Plug Status Screen Text Interface Boot/On/Off Commands Text InterfaceOperation via the Text Interface Boot 1 or /BO Atmswtch Logging Out of Command Mode Applying Commands to Several Plugs Text Interface Automated Mode Manual Operation Saving and Restoring Configuration Parameters Sending Parameters to a File Restoring Saved Parameters Console Port Interface Straight Wired RJ11 CablesInterface Descriptions Specifications Ordering Information Customer Service Apx-3 Apx-4 Trademark and Copyright Information Index 1to5BudRate 464 NetwrkPortAccess 3-1,.534-2,5-5124 Cables