IPSInternetPowerSwitch;User'sGuide
Command Echo: Enables/Disables command echo. When enabled, ASCII commands sent via the Text Interface to the IPS will be echoed back, allowing keystrokes to be displayed. Note that this feature applies primarily to the text interface, and has no visible effect on the Web Browser Interface. (Default = On.)
Inactivity Timeout: Determines how long the IPS will wait for additional commands during periods of inactivity. When the Timeout Period elapses, the user will be disconnected from the IPS command mode. (Default = 2 Minutes.)
Command Confirm: When enabled, the IPS will display a confirmation prompt before switching, reboot, and default commands when the unit is controlled via Text Interface. When disabled, the prompt will be suppressed. (Default = On/Enabled.)
Automated Mode: When enabled, the IPS will execute On, Off, Boot, and exit commands without displaying a confirmation prompt, status screen or confirmation messages. This allows the IPS to be controlled by a device that generates commands to control switching without human intervention. For more information, please refer to Section 6.5. (Default = Off.)
Note: When this option is enabled, security functions are suppressed, and users are able to access System Level menus and control plugs without entering a password. If security is a concern and the Automated Mode is required, it is recommended to use the IP Security feature (Section 5.3.3.1) to restrict access.
Button Mode: Enables and configures the manual plug control button. (Default = "One".)
None: Disables the manual plug button.
One: The manual plug button will only control the outlet on the Master Unit; outlets on Satellite Units will not be effected
mby the manual plug button.
All: The manual plug button will control the outlet on the Master Unit and all connected Satellite Units.
Default Parameters: Resets the IPS to default parameters. All menu selected parameters, including port names and passwords, will be cleared. This option is only available via Text Interface.
| Note: If the this function is invoked via Network Port, |
| the IP Address is not reset. If this function is invoked |
| via Console Port or Modem Port, the IP Address will |
be reset. | |
|
|
