Cisco Systems 7500 Series manual AC-Input Power Supply Cisco

Chapter 1 Cisco 7500 Series Product Overview

AC-Input and DC-Input Power Supply Overview

Caution To prevent system problems, do not mix power supply input types in the Cisco 7507, Cisco 7507-MX, Cisco 7513, Cisco 7513-MX, or Cisco 7576 routers. Both power supplies installed in a router must be either AC input or DC input. Do not attempt to install a DC-input power supply in a router with one AC-input power supply, or vice versa.

The DC-input power cable is not available from Cisco Systems; however, it is available from commercial cable vendors. DC-input power cable specifications are listed in Table 1-1(Cisco 7505), Table 1-2(Cisco 7507), Table 1-3(Cisco 7507-MX), Table 1-4(Cisco 7513), Table 1-5(Cisco 7513-MX), and Table 1-6(Cisco 7576).

For Cisco 7500 series routers used in North America, the following AC-input and DC-input power supplies are available:

•Cisco 7505—Product Numbers PWR/5AC(=) (see Figure 1-24) and PWR/5DC(=) (see Figure 1-25)

•Cisco 7507 and Cisco 7507-MX—Product Numbers PWR/7-AC(=) (see Figure 1-26) and PWR/7-DC(=) (see Figure 1-27)

•Cisco 7513, Cisco 7513-MX, and Cisco 7576—Product Numbers PWR-7513-AC(=) and PWR-7576-AC(=) (see Figure 1-28); and Product Numbers PWR-7513-DC(=) and PWR-7576-DC(=) (see Figure 1-29)

Figure 1-24 AC-Input Power Supply (Cisco 7505)

On/off switch

AC receptacle

Cable retention clip

Figure 1-25 DC-Input Power Supply (Cisco 7505)

On/off switch

Terminal block (cover removed)

DC OK LED

H1998

DC OK LED

H9713

	Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0		1-47