Cisco Systems 7500 Series manual Cisco 7505 System Specifications, Description Specification

Chapter 1 Cisco 7500 Series Product Overview

Cisco 7505 Overview

Figure 1-3 CyBus Backplane in the Cisco 7505

SLOT 4

SLOT 3

SLOT 2

SLOT	1
SLOT	0	H2875

The backplane slots are keyed so that the processor modules can be installed only in the slots designated for them. Keys on the backplane fit into two key guides on each module. Although the RSP uses unique keys, all four interface processor slots use the same key, so you can install an interface processor in any interface processor slot, but not in the RSP slot.

Caution When installing an RSP, ensure that you are installing it in the appropriate slot to avoid damaging the key guides or the backplane.

Cisco 7505 System Specifications

Table 1-1lists the specifications for the Cisco 7505 system.

Table 1-1	Cisco 7505 Specifications
Description		Specification
High-speed backplane		1.067 Gbps CyBus, 4 interface processor slots, and 1 RSP slot
Dimensions (H x W x D)		10.5 x 17.5 x 17.0 in. (26.67 x 44.45 x 43.18 cm)
		Chassis depth including power cord and cable management brackets is
		19 in. (48.26 cm)
Weight		Chassis only (including power supply and fan array): 46 lb (20.87 kg)
		Chassis fully configured with 1 RSP and 4 interface processors: 70 lb (31.75 kg)
Power dissipation		600W maximum configuration with AC-input power supply
		600W maximum configuration with DC-input power supply
Heat dissipation		715W (2440 Btu/hr)
Power distribution		75A maximum @ +5 VDC, 15A maximum @ +12 VDC,
		3A maximum @ –12 VDC, 5A maximum @ +24 VDC
AC-input rating		100 to 240 VAC, wide input with power factor corrector (PFC);
		9A maximum @ 100 VAC, 4A maximum @ 240 VAC (at 600W)
AC-input cable		12 AWG, with 3 leads, an IEC-320 plug on the router end, and a country-dependent plug on
		the power source end
Frequency		50 to 60 Hz

Cisco 7500 Series Installation and Configuration Guide

OL-5008-03 B0 1-5