Cisco Systems 7500 Series manual Cisco 7513 System Specifications

Chapter 1 Cisco 7500 Series Product Overview

Cisco 7513 Overview

Cisco 7513 System Specifications

		Table 1-4lists the specifications for the Cisco 7513 system.
Table 1-4	Cisco 7513 Specifications
Backplane			Two 1.0677-Gbps CyBuses, 11 interface processor slots, 2 RSP slots
Dimensions			33.75 x 17.5 x 22 in. (85.73 x 44.45 x 55.88 cm)
(H x W x D)			Chassis width including rack-mount flanges is 18.93 in. (48.1 cm)
			Chassis depth including power cables and cable-management bracket: 24 in. (60.96 cm)
Weight			Chassis with blower module: 75 lb (34.02 kg)
			Chassis with blower module and 1 power supply: 100 lb (45.36 kg)
			Chassis with blower module and 2 power supplies: 125 lb (56.7 kg)
			Chassis with blower module, 2 power supplies, and all slots filled: ~160 lb (72.58 kg),
			each processor module weighs ~2.5 lb (1.13 kg)
Power dissipation			1600W with a maximum configuration and 1 AC-input power supply
			1600W with a maximum configuration and 1 DC-input power supply
			1700W nominal with a maximum configuration and either 2 AC-input or 2 DC-input power
			supplies
Heat dissipation			1600W (5461 Btu/hr)
AC-input voltage			100 to 240 VAC
Frequency			50/60 Hz
AC-input cable1			12 AWG, with 3 leads, an IEC-320 plug on the router end, and a country-dependent plug on the
			power source end
AC-input voltage			100 VAC at 16 amps (A) maximum, wide input with power factor corrector (PFC)
and current			240 VAC at 7A maximum
DC-input voltage			–48 VDC nominal at 35A in North America
and current			(–60 VDC at 35A in the European Union)
DC-input cable			8 AWG (recommended minimum), with 3 leads and rated for at least 194°F (90°C) (you supply
			the cable)
Power distribution			+5.2 VDC @ 75A, +12 VDC @ 15A, –12 VDC @ 3A, +24 VDC @ 5A
Airflow/noise level			Bottom to top through chassis by variable-speed blower (62 to 70 dBA)
Temperature			32 to 104°F (0 to 40°C), operating; –4 to 149°F (–20 to 65°C), nonoperating
Relative humidity			10 to 90%, noncondensing
Software requirement			RSP2 – Cisco IOS Release 10.3(6) or a later release of 10.3
			RSP4/4+ – Cisco IOS Release 11.1(8)CA or a later release of 11.1
			RSP8 – Cisco IOS Release 12.0(9)S or a later release of 12.0 S
			RSP16 – Cisco IOS Release 12.1(12)E and later and Cisco IOS 12.0(21.02)S and later
Agency approvals			Safety: UL 1950, CSA 22.2-950, EN60950, EN41003, TS001, AS/NZS 3260
			EMI: FCC Class A, EN60555-2, EN55022 Class B, VDE 0878 Part 3, 30 Class B Immunity:
			EN55101/2 (ESD), EN55101/3 (RFI), EN55101/4 (Burst), EN55101/5 (Surge), EN55101/6
			(Conducted), IEC77B (AC Disturbance)

1.The Cisco 7513 requires a minimum of 20A service with a 20A receptacle at the power source. The power cable supplied with the Cisco 7513 uses a 20A male plug.

	Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0		1-19