Western Telematic IPS-15 manual Optional Satellite Unit, Satellite Unit Front Panel

Section2:UnitDescription

2.2. The Optional Satellite Unit

The optional, IPS-15 Satellite Unit allows you to add switched outlets whenever you need them. Satellite Units can be switched On, Off, or rebooted in response to commands issued at the IPS-15 Master Unit.

2.2.1.Satellite Unit Front Panel

The front panel of the IPS-15 Satellite Unit includes two link ports, an address selector switch, and power indicator lights.

Figure 2.3: IPS-15 Satellite Unit - Front Panel

￿

￿

￿

Link Ports: Two RJ11 jacks used to connect the Satellite Unit to the IPS-15 Master Unit, and/or to other IPS Satellite Units. Switching commands are sent from the Master Unit to the Satellite Unit(s) via the Link Ports.

Address Selector Switch: A four position slider switch, which is used to select the address for each IPS Satellite Unit. Note that the address for the Master Unit is always "1." For more information, please refer to Section 4.5.

PWR Indicator: Lights when power is applied to the Satellite Unit. Note that the PWR LED does not indicate the On/Off status of the Satellite Unit's switched AC outlet.

￿PLUG ON Indicator: Lights when the Satellite Unit's

switched AC outlet is switched "On."

2-3