USINGYOURREFRICERAT~R
To obtain the best possible results from your refrigerator, it is iImportant that you operate it properly. This section tells you how to set the controls, remove and adjust the features in your refrigerator, and how to save energy.
SEITINGTHECONTROLS
When you first install your refrigerator, set the Refrigerator Control at 3 and the Freezer Control at B. Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before adding food.
IMPORTANT: If you add food before the refrigerator has cooled completely, your food may spoil. Turning the Refrigerator and Freezer controls to a higher than recommended setting will not cool the compart- ments any faster.
Howthe controls work
There are two controls in your refngerator compartment. Knowing how each works will help you set the controls properly for your own house- hold conditions.
The Refrigerator Control functions as the thermostat
REFRIGERATOR for the entire product (fresh food and freezer
sections). The higher the number setting, the longer the compressor will run to keep the temperature lower.
NOTE: Your refrigerator will not cool when the Refrigerator Control In set to OFF.
The Freezer Control functions as an air flow director Setting “A”will direct more of the cold air into the fresh food section, while setting “C”will direct more of the cold air into the freezer section. The cold air travels from the freezer compartment through the top vent, into your fresh food section
(see the diagram Ensuring Proper Air Circulation on pacge 13).
Hold your hand in front of the top vent (see the diagram Ensuring Proper Air Circulation on page 13) and adjust the Freezer Control to feel the difference in air flow.
a
t- II___
r]“”
12
WITH QUESTIONS OR COMMENTS
