ATCACHINGMEICEMAKERTOWAITRSUPPLY(CONT.)
Connectingto water line
1.Find a
NOTE: Horizontal pipe will work, but the follow-
ing precaution must be taken: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.
2.Measure from connection on rear of refrigerator to water pipe. Add 7 feet (2.1 m) to allow for moving refrigerator for cleaning. This is the length of
3.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.
4.Using a grounded drill, drill a
5.Fasten
6.Slip compression sleeve and compression nut on copper tubing as shown in diagram. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten. Turn ON main water supply and flush out tubing until water is clear. Turn OFF
Vertical cold water pipe
n
sion sleeve nut
TO REFRIGERATOR +
* Controls water supply
10
WITH OUESTIONS OR COMMENTS