THEICEDISPENSERWILLNOTOPERATEPROPERLY
Check if...
The freezer door is not closed completely.
The ice bin is not installed correctly.
The wrong ice has been added to the bin.
The ice has frozen in the ice bin.
The ice has melted around the auger (metal spiral) in the ice bucket.
Ice is stuck in the delivery chute.
There is no ice in the bucket.
The dispenser arm has been held in too long.
Then...
Push the door firmly shut. If it will not shut all the way, see “Thedoors will not close completely,” on page 35.
Push the ice bin in all the way. If the ice bin does not go in all the way, it may not be put in straight. Pull it out and try again.
Use only cubes produced by the current ice maker. If other cubes have been added, remove all cubes and check to see that none have become stuck in the delivery chute.
Shake the ice bin to separate cubes. If cubes do not separate, empty bin and wait 24 hours for ice to restock.
Dump the ice cubes and clean the ice bucket com- pletely. Allow 24 hours for the ice maker to
Clear the ice from the delivery chute with a plastic utensil. Do not use anything sharp to remove the ice. You could cause damage.
See “Howthe controls work,” on page 12.
Release dispenser arm. Ice will stop dispensing when the arm is held in too long. Wait three minutes for dispenser motor to reset before using again. (For future use, take large amounts of Ice directly from the ice maker so that the dispenser arm is not held in too long.)
32
WITH QUESTIONS OR COMMENTS
