REM~~INCTHEICEMAKERSTOM~EBIN
There are several reasons why you may need to re- 3. Lift up the front of the storage bin and pull it out. move, empty, and clean the ice maker storage bin.
lThe ice dispenser has not, or will not, be used for a week or more.
lA power failure causes the ice in the bin to melt and freeze together.
0 The ice dispenser is not used regularly.
lIce tastes
If any of these conditions apply to you, follow the instructions on removing the ice bin.
To remove the ice bin:
1.Pull the covering panel out from the bottom and
2.Lift the signal arm so it clicks into the OFF (up)
1position. Ice can still be
1bispensed, but no more can be made.
4.Empty the ice bin. Use hot or warm water to melt the ice if necessary. Never use anything sharp to break up the ice in the bin. This can cause damage to the bin and the dispenser mechanism.
5.Wash with a mild detergent and rinse well. Do not use harsh or abrasive cleaners or solvents.
When you replace the bin, make sure it is pushed in all the way or the dispenser will not work. Then push the signal arm down to the ON position to restart ice production. Make sure the door is closed tightly.
20
WITH QUESTIONS OR COMMENTS
-
