-
Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for error tones and the hidden function signal:
Press and hold the Stop Time pad for
5 seconds. A short tone will sound to tell you the signals have been
ST:: changed. “Snd” and “On”or “Snd” and “Off”will appear on the
0 display.
Repeat the above step to turn the signals back on.
To choose between high and low volume signals:
Press and hold the Delay Start Time pad for 5 seconds. A short tone will sound to tell you the signals have
it%i been changed. Either “HI”and “Snd”or “LO”and “Snd” will
0appear on the time display to
show the volume you chose. If the volume is changed while the audible signals are off, when signals are turned back on they will be at the volume setting chosen.
12