Whirlpool RBD307PD, RBS307PD, RBS277PD, RBD277PD Before setting the controls, Setting the controls

Before setting the controls

@Makesure clock is set to correct time of day. (See “Setting the clock” on page 10.)

l Make sure the oven door is completely closed.

Setting the controls

NOTE: Displays shown are from single/ upper ovens. Command pads shown are from double ovens. In some cases, lower oven displays and single oven command pads may look different than those shown.

NOTE: On double ovens, you cannot run a Self-Cleaning cycle in both ovens at the same time. Also, if you are setting a Self- Cleaning cycle for the lower oven the control will not let you program any other function in the upper oven.

To start cleaning immediately:

1.

2. Set cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 3’12 hours, use the Hour pad to set the desired cleaning time.

Press the “up”(A) or “down” (V) pad(s) until a time between 2l/~-4l/z hours shows on the display.

l

l

Use 2l/2 hours for light soil.

Use 3’/2-4l/2hours for moderate to heavy soil.

34