Whirlpool RBD307PD The oven lights, PART Oven door glass, What To Use, How To Clean, Oven cavity

PART

Oven door glass

WHAT TO USE

Paper towel and spray glass cleaner

OR

Warm, soapy water and a nonabrasive, plastic scrubbing pad

HOW TO CLEAN

l Make sure oven is cool.

l Follow directions provided with the cleaner.

l Wash, wipe with clean water, and dry thoroughly.

Oven cavity Self-Cleaning cycle

The oven lights

The oven lights will come on when you open the oven door. To turn the lights on when the oven door is closed, press the Oven

Light Pad non the control panel.

Electrical Shock Hazard

l Make sure oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb.

.The light cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven temperatures. Because the light cover is made of glass, be careful not to drop it.

Failure to follow the above could result in electrical shock, burns, or injury from broken glass.

l See “Using the Self-Cleaning Cycle” on pages 33-40.

To replace an oven light:

1.Disconnect appliance at the main power supply.

2.Remove glass light cover by grasping rear or back edge of cover and pulling it away from the side wall of the oven.

3.Remove the light bulb from its socket. Replace the bulb with another halogen bulb (12 volt, 5 watt maximum, available at most hardware stores).

4.Replace the light cover by snapping it back into wall. Reconnect appliance at main power supply.

NOTE: The oven lights will not work during the Self-Cleaning cycle.

42