Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check the lists below and on the next page before calling for assistance or service. If you still need help, see “Requesting Assistance or Service” on page 45.
If nothing operates, check the following:
Is the oven wired into a live circuit with the proper voltage? (See Installation Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
Other possible problems and their causes:
PROBLEM
The oven will not operate
CAUSE
lYou have not set the electronic control correctly. Refer to the section in this manual describing the function you are operating.
lYou have accidentally set the control lock. See “Using the control lock” on page 9.
lYou have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the controls.
The
Display is blank
lYou did not press the Start/Enter pad.
lYou have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the controls.
lYou have set the display not to show the clock time. To see the clock time again, press and hold the Clock pad for 5 seconds.
continued on next page
43