White 1780 Appearent Please, Not threaded, Needle or thread for, Too much presser foot pressure

If

trouble

is

still

appearent,

please

contact

your

English nearest dealer or call

for

service.

PROBLEM

• Too much thread appears on
the wrong side of the	fabric
Wrong side
------Right side

CAUSE

Incorrect upper	threading
(Tension disk is	not threaded)
Upper thread tension is too tight.

SOLUTION
Re-thread the upper	thread.

Adjust the thread tension.

PAGE

P15

P24

• Breaking upper thread

• Breaking bobbin thread

• Skipping stitches

• Puckering

• Machine does not	feed
correctly

Incorrect	upper	threading.
Incorrect	bobbin			threading.
Lint stuck	in the		shuttle.
Upper thread tension						is too tight.
Needle bent or dull					needle.
Incorrect	bobbin			threading.
Needle inserted				incorrectly.
Needle bent.
Incorrect	needle or thread for the
fabric.
Incorrect	needle			threading.
Incorrect	upper		threading.
Upper thread tension is too							tight.
Incorrect	upper		threading.
Incorrect bobbin				threading.
Needle too thick for the fabric.
							.
Too much presser foot pressure
Lint stuck in the feed dog.
Not enough presser						foot
pressure.
						.
Feed dog is disengaged

Re-thread the	upper		thread.
Re-thread the	bobbin				thread.
Clean the shuttle		and the feed dog.
Adjust the thread		tension.
		.
Insert a new needle
Re-thread the	bobbin				thread.
	.
Reset the needle
		.
Insert a new needle
Use correct thread and needle.
Re-thread the	needle				eye.
Re-thread the	upper			thread.
Adjust the thread		tension.
Re-thread the upper				thread.
Re-thread the	bobbin				thread.
Use correct thread and needle.
Raise the presser foot pressure
adjustment lever.
Clean the shuttle and the feed dog.
Lower the presser foot pressure
adjustment lever.
Raise the feed dog.

P15 P13 P43 P24 P20 P13

P20

P15 P24 P15 P13 P21

P43

P10