Troubleshooting 105
not faulty.
Procedures for All ProLiant Servers The procedures in this section are comprehensive and include steps about or
references to hardware features that may not be supported by the server you are
troubleshooting.
Hardware Problems
Power Problems (on page 105)
General Hardware Problems (on page 107)
Internal System Problems (on page 112)
External Device Problems (on page 126)
Power Problems
List of Problems:
Power Source Problems..............................................................................................................105
Power Supply Problems..............................................................................................................106
UPS Problems.............................................................................................................................106
Power Source Problems
Action:
1. Press the Power On/Standby button to be sure it is on. If the server has a
Power On/Standby button that returns to its original position after being
pressed, be sure you press the switch firmly.
2. Plug another device into the grounded power outlet to be sure the outlet
works. Also, be sure the power source meets applicable standards.
3. Replace the power cord with a known functional power cord to be sure it is
not faulty.
4. Replace the power strip with a known functional power strip to be sure it is