200 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
172-1-Configuration Non-volatile Memory Invalid
Audible Beeps: None
Possible Cause: Nonvolatile configuration corrupted.
Action: Run the server setup utility and correct the configuration.
180-Log Reinitialized
Audible Beeps: None
Possible Cause: The IML ("Integrated Management Log" on page 80) has been
reinitialized due to corruption of the log.
Action: Event message, no action is required.
200 Series
List of Messages:
201-Memory Error......................................................................................................................201
203-Memory Address Error........................................................................................................201
207-Memory Configuration Warning - DIMM In Socket x does not have Primary Width of 4
and only supports standard ECC ................................................................................................201
207-Invalid Memory Configuration - DIMMs Must be Installed Sequentially..........................201
207-Invalid Memory Configuration - DIMM Size Parameters Not Supported..........................202
207-Invalid Memory Configuration - Incomplete Bank Detected in Bank X............................ 202
207-Invalid Memory Configuration - Insufficient Timings on DIMM...................................... 202
207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank......................202
207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank......................202
207-Invalid Memory Configuration - Unsupported DIMM in Bank x.......................................203
207-Invalid Memory Configuration - Single channel memory.................................................. 203
207-Invalid Memory Configuration - Unsupported DIMM in Socket X ...................................203
209-Online Spare Memory Configuration - No Valid Banks for Online Spare......................... 204
209-Online Spare Memory Configuration - Spare Bank is Invalid............................................204
212-Processor Failed, Processor X.............................................................................................204
214-Processor PPM Failed, Module X.......................................................................................204