SCRUB CONTROLS
SCRUB DECK ROTARY SWITCH (DELUXE)
Raises and lowers the scrub deck, and turns the scrub brush motors on and off, and controls the solution solenoids.
For
To raise the deck, turn off the brush motor and solenoid(s). Rotate the knob to the off position to the far counter clockwise position.
For extraction or “B” mode, rotate the function knob to the “B” position. The “B” chemical will be drawn from its tank and delivered to the solution system. The scrub deck will lower and the scrub motor will turn on and the extraction solenoid and
To raise the deck, turn off the brush motor and solenoid(s). Rotate the knob to either the off position to the far counter clockwise position, or rotate the knob to the far clockwise position to the accessory mode so that the vacuum motor continues to run to keep any excess soiled solution from dripping back onto the floor.
To use the machine with an accessory hand tool or wand rotate the knob fully clockwise to the accessory position. Only the vacuum motor and pump will run. Connect the solution hose of the accessory tool to the solution accessory port. The fitting is 1/8” male quick disconnect. If needed to adapt to 1/4” male quick disconnect (see Suggested Spare Parts for part number). NOTE: The accessory port is only supplied with water from the solution tank. No chemical is injected.
To connect the vacuum hose, open the accessory port cover and insert the wand vacuum hose fully into the port.
| 86292490 VOYAGER DUO 08/20/07 |
