DRIVE MOTOR CARBON BRUSH REPLACEMENT
Do not use a pressure washer to clean around the motors. Use tap pressure only.
FOR SAFETY: Before leaving or servicing machine, stop on a level surface, turn off machine and remove key.
1.Disconnect batteries from machine.
2.Disconnect the electrical connection to the traction motor.
MAINTENANCE- DRIVE ASSEMBLY
3.Remove brush cap.
4.Release brush from spring tension. Remove screw connecting brush wire lead to brush holder. Clean brush holder to insure free movement.
7.Install new brush and reinstall connecting screw and lead.
8.When all new brushes are installed. Place all in retracted position, held into brush holder by spring tension.
9.Carefully replace brush cap.
86292490 VOYAGER DUO 08/20/07 |
|
