TO BEGIN SCRUBBING
When operating the machine around people, pay close attention for unexpected movement. Use extra caution around children.
1.Turn machine power on.
2.Position rotary switch to the position matching the process to be preformed, and the chemical that was added to the solution tank or chemical tank (Deluxe), either interim or
3.Check position of reverse button and the position speed control knob so that the machine is set to travel in the direction and the speed intended.
4.Drive machine forward to begin scrubbing.
MACHINE OPERATION
TO STOP SCRUBBING
1.While scrubbing turn off the pump switch to stop spraying solution. Continue to scrub and recover the solution for an additional pass.
2.Allow the throttle switches to return to neutral.
3.Rotate the selector switch to the accessory position so that the vacuum motor continues to run and evacuate the system. This will also raise the deck and vacuum shoes.
4.Turn the rotary switch to the off position by rotating the selector switch clockwise. Turn machine power off.
DELUXE
1.While scrubbing turn off the pump switch to stop spraying solution. Continue to scrub and recover the solution for an additional pass.
2.Allow the throttle switches to return to neutral.
3.Rotate the selector switch to the accessory position so that the vacuum motor continues to run and evacuate the system. This will also raise the deck and vacuum shoes.
4.Turn the rotary switch to the off position by rotating the selector switch clockwise. Turn machine power off.
FOR SAFETY: Before leaving or servicing
machine: stop on level surface, turn off machine and remove key.
FOR SAFETY: When using machine, go slow on inclines and slippery services.
86292490 VOYAGER DUO 08/20/07 |
|
