
10.4 NETWORK SettingS
Menu SETTINGS Network and press the
key.
The ethernet port located on your PVR10HD will allow it to receive
The default DHCP IP mode setting will automatically configure your PVR10HD based
on your existing network settings. However, if required, you may choose STATIC and enter the necessary information.
10.5 Factory Reset
WARNING: Factory reset will revert all settings back to factory defaults and erase all channels. Beware when choosing this option!
Menu SETTINGS Factory reset
Press the key and input the local password (The default password is 0000).
Use the key to highlight OK and press the
key.
Wait for the reset operation to complete. Your PVR10HD will prompt you to do a channel scan once it’s done. Confirm it to initiate an auto channel search.
43