Woods Equipment BW240HD Safety & Instructional Decals, Danger, Replace Immediately If Damaged, Pn

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

MODEL NO.	SERIAL NO.
	Woods Equipment Company
	Oregon, Illinois, U.S.A.

1 - SERIAL NUMBER PLATE

PN 1006348 - Located on Wheel Rims

WARNING	EXPLOSION
	HAZARD
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.		1006348
RELEASE ALL AIR PRESSURE BEFORE LOOSENING BOLTS.

MAX. SPEED: 20 MPH, MAX. WEIGHT: 4000 LBS., MAX. AIR PRESSURE: 40 PSI.BE CAREFUL!Use a clean, damp cloth to clean safety decals.

2 - FRONT AMBER REFLECTOR (PN 1002940)

3 - REAR RED REFLECTOR (PN 57123)

4 - PN 18869

Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

Replacement safety decals can be ordered free from your Woods dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319-6637.

DANGER
SHIELD MISSING		18869-B
DO NOT OPERATE - PUT SHIELD ON
17 - PN 1004114
DANGER
If shaft connection is visible, shield
is missing. Replace shield before
operating equipment.	1004114

MAN0763 (10/10/2008) Safety 11