Woods Equipment BW240HDQ manual Assembly, Install Wing Wheel Yoke

5. Hydraulic cylinder

18. 1" x 4.58" Clevis pin

19. 1" x 5.08" Clevis pin

20. Wing transport lock

23. 1/4 NPT x 1/4 NPT Elbow, restricted

24. 1/2 NPT x 1/4 NPT Reducer bushing

25. 1/4 NPT x 1/4 NPT x 264" Hose

29. 1 x 8.41 Headless pin

33. 1" Flat washer

40. Lynch pin, chain & cotter asy

63. 1/4 x 1-1/2 Cotter pin

Figure 29. Wing Cylinder & Wing Transport Lock Installation

Install Wing Wheel Yoke

1.Attach wing wheel yoke (6) to the wing using pivot pins (31). Make sure pin flange is on the underside of the deck. See Figure 30.

2.Secure pivot pins to deck using carriage bolts (67) and flange lock nuts (53). Carriage bolts are on the outside, lock nuts on the underside.

3.Insert wheel hub (17) into wing wheel yoke arm (6) and align holes.

4.Secure into position using cap screw (30) and flanged lock nut (53).

5.Attach wheel to hub using five lug nuts. Install the chamfered side of the lug nut toward the inside for steel rim for pneumatic tires and rims. Tighten to 75 lbs-ft. Set tire pressure to a maximum of 40 psi.

NOTE: Install the flat side of the nut toward the inside for solid tires and aircraft tires (shown).

6.Install optional dual wheel and hub to inside of wheel yoke arm.

6. Wing wheel yoke arm, right

17. Wheel and hub

30.1/2 NC x 3 HHCS GR5

31.Pivot pin, 1-1/4

53. 1/2 NC Flanged lock nut

67. 1/2 NC x 1-1/2 Carriage bolt

Figure 30. Wing Wheel and Hub Installation - Right

38 Assembly MAN0763 (10/10/2008)